May 26, 2017
Product Spectrum
 
STARTER MOTORS
Light Duty
Click Here to view Detailed Specification
Model   Capacity
PG 150
SD 80
WP 220
:
:
:
12V - 1.4 KW
12V - 0.8 KW
12V - 2.2 KW

Application

· Light / Medium Duty Vehicles
· Tractors and Jeeps

Technical Details

· 4 Pole permanent magnet.
· 2 Turn Armature winding.


Reduction Gear Click Here to view Detailed Specification
Model   Capacity
M93R
M95R
M105R
:
:
:
12V - 3.0 KW, 24V - 6.0 KW
12V - 3.5 KW, 24V - 5.0 KW
12V - 5.0 KW, 24V - 7.5 KW
R 42 Click Here to view Detailed Specification

Engine Capacity

Diesel : upto 14.8 litres

Specification

12V - 4.6 KW
24V - 7.5 KW

Rotation

Clockwise or Anticlockwise.

Standard Pinions

SAE #1,SAE #3.

Standard Pinions

11-teeth/6-8 pitch, 12-teeth/8-10 pitch, 13-teeth/8-10 pitch, 12-teeth/Module 3.

Weight

26.3 kg.

Rotatable Drive Housing

Two-piece rotatable drive
housing 12 or 24 positions.

Drive

Heavy duty design
Positive Engagement
Rubber shock absorber.

R42 Starter Motor


R 50 Click Here to view Detailed Specification

Engine Capacity

Diesel : upto 29.5 litres

Specification

24V- 9.0 KW
also available in 32V and 68V

Rotation

Clockwise or Anticlockwise.

Standard Mountings

SAE #3.

Standard Pinions

11-teeth/6-8 pitch, 12-teeth/8-10 pitch, 13-teeth/8-10 pitch, 12-teeth/Module 3

Weight

35.8 kg

Rotatable Drive Housing

Two-piece rotatable drive housing
12 or 24 positions.

Drive

Heavy duty design
Positive Engagement
Rubber shock absorber.

R50 Starter Motor



ALTERNATORS / GENERATORS
REIL 12 / 24V - 30A to 55A Click Here to view Detailed Specification

System Voltage 12V or 24V
Rotation Clockwise
Mounting As per custumer needs
Performance 30Amps to 50Amps in 12V (RA 12 Model)
30Amps to 55Amps in 24V (RA 13 Model)
Weight 4.5 Kgs.(RA 12 Model), 7 Kgs. Approx (RA 13 Model)
(without vacuum pump)
Application Passenger cars (Petrol and Diesel), MUVs, SUVs, LCVs,
MCVs. Commercial Vehicles, Heavy Duty Stationary Engines and Heavy Earth Movers 
Rotor 12 poles dynamically balanced.
Varnish Impregnated.
Stator High output low weight.
Varnish Impregnated.
Electronic Regulator High grade semiconductors.
Thermal compensation provided.
Rectifier 12.7 mm press fit Heavy Duty Diodes.
Reverse polarity protection fuse.
Ball Bearing Sealed lubrication for life.
Anti vibration encapsulation for slip ring and bearing
Prestolite 12 / 24V - 75A to 300A Click Here to view Detailed Specification
Model   Capacity
MDA/MDP
8SC
AC172R
AC203
AB172R
BLD/BLP
:
:
:
:
:
:
12V - 110-150A, 24V - 55-80A
12V - 160-185A, 24V - 100A-175A
24V - 140-155A
24V - 115A/180A
24V - 90-300A
12V - 140-185A, 24V - 140A

FUEL SHUT OFF SOLENOIDS
Diesel Engines Click Here to view Detailed Specification
Fuel Shut Off solenoid is attached to Engine's main Electrical system and its function is to cut off the fuel supply to the F.I.P. when the key is switched off.

Fuel Shut Off Solenoid is operated in place of cable / mechanical system to stop the Engine.

REIL solenoids are designed with dual coil . Pull in coil is designed for high current rating to provide maximum pull or push load where as , the Hold on coil is designed for low current rating to hold the plunger in its place for long duration . The Hold on coil can be energized continuously without over heating .Dual coil design is compact in size in comparison to single coil design.

Pull in coil to Hold on coil switch over is controlled electronically which prevents frequent burning of coil . Bellow provided on the plunger protects the solenoids from dust and water entry.

Specification

Volts
Rating
Stroke
Load
Pull in current
Hold on current
Frame size
Over all length
:
:
:
:
:
:
:
:
24 Volts
Continuous
30 mm
5.5 Kg
60A max
2A max
57.4 mm
145 mm

RUN STOP VALVE
Run Stop Valve Click Here to view Detailed Specification

Specification

Volts   : 24 Volts
Power   : 14.5 Watts
Rating   : Continuous
Flow Rate : 3.6 lit / min
Working Pressure : 4.5 Bar
Frame Size : 40 mm
Weight   : 1 Kg

EMERGENCY STEERING MOTORS
Mining Equipments Click Here to view Detailed Specification
An emergency steering system includes a backup gear pump which is driven by a DC motor, used in heavy vehicles such as dozers, dumpers as an alternate provision to assist hydraulic steering system when a regular hydraulic circuits fails.

The gear pump assembly is designed to develop high pressure which is required to operate the emergency steering system. With full load, the emergency steering motor can be operated up to a maximum of three minutes.

Mounting brackets are designed with cast iron to absorb vibration.

Features

Heavy Duty

System volts
Maximum delivery pressure
Operating temperature
Weight
:
:
:
:
24 Volts
210 Kg / Sq.cm
-30°C to 120°C
31 Kg

Light Duty

System volts
Maximum delivery pressure
Operating temperature
Weight
:
:
:
:
24 Volts
140 Kg / Sq.cm
-30°C to 120°C
23.9 Kg
 

Copyright © 2008 REIL Electricals India Limited. All rights reserved.